Al453+Sub905 Sound Column Combination with Source DSP
- Impedance
- 8 Ohms
- Sensitivity
- 95dB
- Application
- Commercial, Professional Performance
- Hi-Fi
- Hi-Fi
- Activity
- Active
- Operation Mode
- Wire / Remote Control
Specifications
| Product name | Al453+Sub905 Sound Column Combination with Source DSP |
|---|---|
| Category | Speaker Amplifiers & Audio Processors |
| Customization | Available |
| Hi-Fi | Hi-Fi |
| Model NO. | AL453+SUB905 |
| Activity | Active |
| Operation Mode | Wire / Remote Control |
| Application | Commercial, Professional Performance |
| Certification | CE |
| Monitor | Non |
| THD | <0.005% |
| System Type | Column Speaker |
| Impedance | 8 Ohms |
| Model | Al453+Sub905 |
| Sensitivity | 95dB |
| Program/Peak | 1000/2000W |
| Max Sound Pressure | 126dB |
| Response | 35-20000Hz |
| Transport Package | Carton Case |
| Specification | 1PCS/CTN |
| Origin | Guangzhou, China |
| HS Code | 8518220000 |
| Production Capacity | 200PCS/Month |
| Package Size | 71.00cm * 58.00cm * 69.00cm |
| Package Gross Weight | 63.000kg |
| Maximum sound pressure level | 123dB Wide projection range for large-area coverage |
| Price | US$1,470.00 1 Set(MOQ) |
| Supplier | Guangzhou Skytone Audio Co., Limited |
| Data retrieved | 2026-10-23 |
Available options
| Speaker Material | / |
|---|---|
| Impedance | 8 Ohms |
Additional data
| Model | AL453 | SUB905 |
|---|---|---|
| Rated Power | 240W | 1000W |
| Peak Power | 480W | 2000W |
| Impedance | 8Ω | 8Ω |
| Frequency Response @ -6dB | 100Hz - 20KHz | 35Hz - 250Hz |
| Full-range Driver | 3×4.5", 25mm VC | 1×15", 220Mag, 4"VC |
| Sensitivity (@1W/1m) | 95dB | 92dB |
| Max SPL (Cont/Peak, Bi - Amp) | 120 / 123 dB | 126dB |
| Dispersion Angle H x V | 150° x 15° | // |
| Recommended High-pass Filter | 80Hz - 24dB/octave | // |
| Input Connection | // | Powercon ,XLR |
| Dimensions (W x H x D) | 130 x 510 x 143mm | 480×600×530mm (+Col+Rod+Cov: 480×600×610mm) |
| Net Weight | 6.25kg | 40.4kg (+Col+Rod+Cov: 59.45kg) |
| Power amplifier module parameters | |
|---|---|
| INPUT | 2 x XLR female Input |
| signal output | 2 x XLR male output (LINK) |
| Input Sensitivity | balanced 0.77V, unbalanced 1.4V |
| Built in audio processor | 96K/24Bit high-performance DSP audio processor |
| Frequency range | 20Hz-20KHz |
| Signal to Noise Ratio | >106 dB |
| Boot Protection | Startup delay, gradually increasing startup volume |
| Operation protection | Short circuit, overload, overheating, limiting amplitude |
| PFC Switching Power Supply | ~90-260V wide voltage input |
| Link interface | USB,RS485 IN/OUT |
| Rated power of power amplifier | 1200W+700W/8Ω 2000W+1100W/4Ω |
Product description
The supplier lists this product. Its stated application is Commercial, Professional Performance. The listed model is AL453+SUB905. The specifications below reflect the information publicly displayed on the listing. Noise: /. Model NO.: AL453+SUB905. Speaker Material: /. Impedance: 8 Ohms. Model: Al453+Sub905. Sensitivity: 95dB.
Specifications, options and prices reproduce the supplier's published listing. Please confirm critical parameters with us before ordering.
FAQ
What is the minimum order quantity for Al453+Sub905 Sound Column Combination with Source DSP?
The listed minimum order quantity is 1 set. Tell us your quantity in the inquiry form and we will confirm it with the manufacturer.
How much does Al453+Sub905 Sound Column Combination with Source DSP cost?
The published price is US$1,470.00 per set. Final pricing depends on quantity, options and destination.
Can it be customized with my logo, color or packaging?
Yes — the listing states that customization is available (Available). Describe your requirements in the inquiry.
Where do these specifications come from?
Specifications, options and prices reproduce the manufacturer's published listing on the date shown in the specification table. Please confirm critical parameters before ordering.
Send an inquiry
AL453+SUB905 · US$1,470.00 · MOQ 1 Set
